Download and Install Official J330FXXU1AQF9 Nougat On Galaxy J3 SM-J330F

Samsung Galaxy J3 SM-J330F (2017 Model) has started receiving the official Android Nougat 7.0 Update.This Nougat firmware includes June security patch update and comes with build number J330FXXU1AQF9.Here we also shared the direct link to download the Official J330FXXU1AQF9 Nougat Firmware (.tar) For Galaxy J3 SM-J330F and a step by step guide to install it via Odin Flash tool.

The update is live via OTA (Over-the-air) which means you are going to receive the OTA notification in anytime if your device is not rooted.You can manually check for the update in your phone’s settings.

If there is no update available, wait for few days for the update to come in your region or you can Manually Update Galaxy J3 SM-J330F to Official J330FXXU1AQF9 Nougat by following this simple guide.

Must Read: Download Galaxy J3 2016 Latest Stock Firmware (With Few Older Versions)

Firmware Details:

DISCLAIMER

TheDroidGuru.com is not responsible for any damage happened to your device(s) while following this guide, Proceed at your own risk.

PRE-REQUISITES

• This Update is only for Galaxy J3 SM-J330F
• We recommend to take complete backup and proceed.
• Maintain 50-60% battery to prevent sudden shutdown between the process.

Downloads

Steps to Install Official J330FXXU1AQF9 Nougat On Galaxy J3 SM-J330F

PART-1 Enable USB Debugging On Your Galaxy Device

PART-2Flash J330FXXU1AQF9 Nougat Firmware Using Odin

Step 1.First Download the Nougat Firmware from the download section above.

↳If it is .Zip file then extract it, you will get .tar or .tar.md5.

Step 2.Download and Unzip the Latest Odin file and run/open the odin.exe file from the extracted files on your PC. (Download it from the download section above)

Step 3.Now Boot your Samsung device into Download Mode.

Steps to boot into Download Mode (Samsung Devices)

Step 4.Then simply connect your Galaxy device to your PC via the use of USB cable and the ODIN would notify an added message.

Step 5.After that, choose AP in Odin and select the J330FXXU1AQF9 firmware file in which you have downloaded.

↳Will be in .tar.md5 format

Step 6.Now Click the “Start” button at the bottom of the ODIN screen to start the process.

↳This will start the flashing process.It will take some time to complete

Step 7.Once completed, your phone will reboot.Now your Galaxy J3 should be running J330FXXU1AQF9 Nougat Update

If you have any questions or suggestions related to this post, feel free to leave that in the comment section below 🙂